Shell Specifications

GENERAL XLII-45 XLII-40
LENGHT, OVERALL 45.0 FT. 40.0 FT.
WHEELBASE 315.0 IN. 280.0 IN.
WIDTH, OVERALL 102.0 IN. 102.0 IN.
HEIGHT, OVERALL (BOTH MODELS) 133.75 IN. OR 136.75 IN.
HEIGHT, FLOOR-TO-CEILING (BOTH MODELS) 83.0 IN. OR 86.0 IN.
HEIGHT CABIN FLOOR 48.5 IN. 48.5 IN.
USABLE FLOOR LENGHT - COMPLETELY FLAT (NO WHEEL HUMPS) 37.75 FT. 32.75 FT.
STORAGE CAPACITY, UNDERFLOOR 407 CU.FT. 315 CU.FT.
ENTRANCE DOOR WIDTH 30.0 IN. 30.0 IN.
ENTRANCE STEP HEIGHT 15.0 IN. 15.0 IN.
OVERHANG - (INCL. BUMPER) FRONT 68.75 IN. 68.75 IN.
OVERHANG - (INCL. BUMPER) REAR 107.75 IN. 82.75 IN.
TURNING RADIUS  41.75 FT. 37.75 FT.
INTEGRAL STRUCTURE (STAINLESS STEEL AND RUST-PROTECTED HIGH TENSILE STEEL) STANDARD STANDARD
STAINLESS STEEL OUTER SHELL (UP TO WINDOW LEVEL)  STANDARD STANDARD
FUEL TANK  - STANDARD (US GALS.) 208.0 250.0
AUXILIARY FUEL TANK - OPTIONAL (US GALS.) 90.0 N/A
FUELING FROM BOTH SIDES (W/STD. TANKS) STANDARD STANDARD
VEHICULE DRY WEIGHT WITH FULL A/C (LBS.) 29 500 29 020
GROSS VEHICULE WEIGHT RATING (LBS.) 50 500 50 500
AXLE DESIGN LOAD CAPACITY (LBS.) - FRONT 16 500 16 500
AXLE DESIGN LOAD CAPACITY (LBS.) - DRIVE 21 400 21 400
AXLE DESIGN LOAD CAPACITY (LBS.) - TAG 12 600 12 600
DRIVER-ONLY A/C STANDARD STANDARD
FULL A/C OPTIONAL OPTIONAL
A/C BLOWER VARIABLE SPEED CONTROL STANDARD STANDARD

POWERTRAIN
DDEC IV SERIES 60, 12.7L (500 HP) STANDARD STANDARD
3-SPEED ENGINE COOLING FAN (CONTROLLED BY AN IN-LINE THERMOSTATIC CLUTCH) STANDARD STANDARD
ALLISON WORLD HD4060, 6-SPEED AUTOMATIC STANDARD STANDARD
CRUISE CONTROL STANDARD STANDARD
JACOB ENGINE BRAKE (ON ALL CYLINDERS) OPTIONAL OPTIONAL
ALLISON HYDRAULIC TRANSMISSION RETARDER OPTIONAL OPTIONAL

BRAKES		    
ANTILOCK BRAKING SYSTEM (ABS) STANDARD STANDARD
HEAVY-DUTY DISC BRAKES (ALL WHEELS) STANDARD STANDARD
FRONT WHEELS BRAKE BOOSTERS TYPE 22 TYPE 22
DRIVE WHEELS BRAKE BOOSTERS TYPE 24-24 TYPE 24-24
TAG WHEELS BRAKE BOOSTERS TYPE 16-16 TYPE 16-16
AUTOMATIC BRAKE SLACK ADJUSTERS STANDARD STANDARD
PARKING BRAKE BOOSTER ON TAG WHEELS STANDARD STANDARD

STEERING & SUSPENSION XLII-45 XLII-40
TILT AND TELESCOPIC STEERING WHEEL STANDARD STANDARD
ZF INTEGRAL POWER STEERING (CONSTANT) STANDARD STANDARD
ZF POWER STEERING (VARIABLE ASSISTANCE) OPTIONAL OPTIONAL
INDEPENDENT SUSPENSION SYSTEM STANDARD STANDARD
FRONT & DRIVE AXLES SWAY BARS STANDARD STANDARD
56° TURNING ANGLE (W/ALUMINIUM WHEELS) STANDARD STANDARD
LIFTABLE TAB AXLE STANDARD STANDARD
AUTOMATIC SELF-LEVELING SYSTEM (COACH IN MOTION) STANDARD STANDARD
INTEGRATED PNEUMATIC LEVEL-LOW LEVELING SYSTEM (COACH IN STATION) OPTIONAL OPTIONAL

TIRES AND WHEELS		    
MICHELIN 315/80R X22.5 (ALL WHEELS) STANDARD STANDARD
22.5 X 9" STEEL RIMS (ALL WHEELS) STANDARD STANDARD
22.5X8.25" STEEL RIMS (INNER DRIVE AXLE)  STANDARD STANDARD
SIX 9" POLISHED ALUMINIUM RIMS W/TWO 9" STEEL RIMS ON INNER DRIVE AXLE OPTIONAL OPTIONAL

ELECTRICAL		    
12-VOLT EXTERIOR LIGHTING STANDARD STANDARD
24-VOLT MECHANICAL SYSTEMS STANDARD STANDARD
24-VOLT/75-AMP. ALTERNATOR W/DRIVER A/C STANDARD STANDARD
24-VOLT/270-AMP. ALTERNATOR W/FULL A/C STANDARD STANDARD
12-VOLT/145-AMP. ALTERNATOR (HOUSE SYST.) OPTIONAL OPTIONAL

FACTORY-INSTALLED EQUIPEMENT
PREVOST-PATENTED FRAMLESS  SIDEWINDOWS AVAILABLE AVAILABLE

CHOICE OF SIDEWINDOWS ARRANGEMENT

 AVAILABLE AVAILABLE
TYPE OF SIDEWINDOWS -- SINGLE/DUAL-PANE, FIXED, SLIDING, AWNING AVAILABLE AVAILABLE
TINTED EXTENDED WINDSHIELD OR BLOCK-OFF AVAILABLE AVAILABLE
LEFT/RIGHT WINDSHIELD ROLLER BLINDS STANDARD STANDARD
DRIVER'S WINDOW BLIND OPTIONAL OPTIONAL
RAMCO ELECT. REMOTE HEATED REARVIEW MIRRORS (FLAT GLASS W/SEPARATE CONVEX ON TOP, PAINTED) STANDARD STANDARD
RAMCO ELECT. REMOTE HEATED REARVIEW MIRRORS (FLAT GLASS W/SEPARATE CONVEX ON TOP, CHROMED) OPTIONAL OPTIONAL
CENTRAL DOOR LOCKING SYSTEM STANDARD STANDARD
WABASTO AUXIL. HEATER (80 000 BTUs) OPTIONAL OPTIONAL
TRAILER HITCH PACKAGE STANDARD OPTIONAL
LOW FUEL INDICATOR LIGHT STANDARD STANDARD
TURN SIGNAL LIGHTS (4 EXTRA) OPTIONAL OPTIONAL
SIDEMARKER LIGHTS (4 EXTRA) OPTIONAL OPTIONAL
COURTESY LIGHTS BLINKER SWITCH STANDARD STANDARD
COURTESY LIGHTS GROUP (ENGINE AND UNDERFLOOR COMPARTIMENTS) STANDARD STANDARD
EXTERIOR GRAPHICS DESIGN ASSISTANCE AVAILABLE AVAILABLE
FACTORY EXTERIOR PAINT AVAILABLE AVAILABLE

Note:
These specifications are based on the latest product information available at the time of printing (00.03.07) and are subject to change without notice. Contact the PREVOST VIP Coach Shell Division or your PREVOST - appointed interior designer and systems manufacturer for full details on the State-of-the-art standard features, packages and options available on the PREVOST LeMIRAGE XLII conversion coach shells.